Cembrit Windstopper Basic
Cembrit Windstopper Basic has a very low vapour transmission resistance, enabling moisture from inside the building to pass through. The unique manufacturing process does not include compressing resulting in a natural rough surface. In consequence, insulation can be placed directly against the inner side of the board. The board is powerfully resistant towards both rot and fungal growth and can withstand considerable fluctuations in weather and climate conditions. Adding to this, the Cembrit Windstopper Basic is non-combustible. When installed according to Cembrit installation instructions, Cembrit Windstopper Basic will function as a temporary facade for up to 6 months.
Euroclass A2 to EN13501-1
High density material
High impact resistance
Can be pressure washed
Suitable backer for laminates
Can be used in composite panels
Available Cut to size or Sheet form.
Fire rated partitions and systems
Thickness 9 mm
Screws and Nails
Cembrit Windstopper Tape
Build Now, Pay Later with Klarna.
Structural calculations required to determine dynamic forces e.g. wind load and dead loads (weight of the cladding) under project circumstances. Fixings, Bracket Numbers & Spacing are all affected. Please speak to us if you are unsure.